Precauzioni quando si utilizza un'alimentazione stabilizzata CC
1. First gradually adjust the "Coarse" button according to the required tension, and then gradually adjust the "Fine" button to ensure correct fit. For example, if you need to output a voltage of 12V, you must set the "coarse adjustment" button to 15V, and then set the "fine adjustment" button to 12V, otherwise it will not reach 12v, and the maximum output voltage will not reach 12V.
2. Impostare la tensione desiderata e quindi ricollegarla al carico.
3. If you need to change the "coarse adjustment" gear during operation, you must first disconnect the load, set the output voltage to the desired value, and then connect the load.
4. If the load is short-circuited or overloaded during operation, please disconnect the load first, then press the "recovery" button or turn off the power and then turn it on again to restore the voltage to normal operation. Connect after troubleshooting the load.
5. Quando si collegano in serie alimentatori con diverse correnti nominali, la corrente di uscita deve corrispondere al valore nominale della corrente nominale minima.
6. Ciascun alimentatore ha una testina di misurazione per visualizzare la corrente di uscita o la tensione di uscita del canale in diversi stati A/V. Solitamente posizionato nello stato indicante la tensione.
7. Each channel has two output connectors, red and black. The red connection means " plus ", the black connection means "-", and the black connection with the black symbol "earth" in the center of the control panel indicates that connection. Connect to the enclosure, and connect to each socket. One output has no electrical connection and is only used as a safety wire. It's easy to understand that the symbol "ground" means ground, and the " plus " and "-" represent the positive and negative output power to power the op amp at double the power.
8. È possibile collegare due tensioni in serie. È vietato l'uso simultaneo. Poiché l'alimentatore è un dispositivo di alimentazione, i terminali di uscita non possono essere cortocircuitati-per molto tempo.
Professional Manufacture of DC power supply
Contact: MS Judy yan
Whatsapp/Wechat/Cell.: 86-18822802390
Skype: 86-13923403246
E-mail: Marketing@gvdasz.com
Sito web:
